Couronne Wolftooth 104 BCD Bash Ring – WolfTooth Components


The 104 BCD bashring can be added to the crankset to protect a 104 or 64 BCD Couronne.Properly sized to fit 104 or 64 BCD Couronne Two sizes pour ultimate protection: smaller 26-30t (132 mm diameter) and mid-sized 32t-34t (148 mm diameter).    CompatibilityThese are pour use with 104 BCD Couronnes or 64 BCD Couronnes on 104 BCD cranksets These are compatible with all triple 104 BCD cranksets and mount in the “big ring” position They are compatible with double cranksets that have flat outfacing mounting tabs, like XTR M980. However, many 2x specific cranks, like Shimano XT M785, have a profiled outer surface on the mounting tab so our bashring cannot be mounted on that non-flat surface. These work great with the 104 BCD Elliptical 32t ring. They will work with the 34t as well, but at the max diameter a few teeth will extend just beyond the bashring. Couronne bolt requirements pour this bashring104 x 30t – 10mm bolts are required pour use with the bashring. Other 104 BCD sizes – you will need 8mm bolts (stock size that comes on 3x cranksets holding the middle and big rings on). Wolf Tooth does not make these. When using with the 64 BCD you will need 6mm bolts to mount the bashring.  Note: Orient the head of the bolt to the inside to provide clearance pour the chain (bolts will go in backwards). Related Products104 BCD Couronnes 64 BCD Couronnes Couronne Bolts Tech SpecsWeight:   26-30t • 51g  |  32-34t • 55g Material:  7075-T6 aluminum Outside diameter:  26-30t • 132 mm  |  32-34t • 148 mm Made in the USA WARNING Handling this product will expose you to chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. pour further information go to​ Patent and trademark information

Rupture de stock

UGS : 4398 Catégories : , ,