Couronne Wolftooth 40T GC Cog pour SRAM pour 10-speed – WolfTooth Components


The GC line of cassette extender cogs allows you to modify your 10-speed cassette into a wide range cassette. To achieve the optimal shifting, the GCs are optimized pour Shimano or SRAM cassette. CompatibilityCompatible with SRAM 10-speed cassettes listed on the GC tech page Compatible with all 10-speed rear derailleurs and chains Note that you may need a longer chain that you currently have your bike Chain stretch should be less than .5 when installing a new GC Can be run in 2x configuration with a long cage rear derailleur Hub compatibility These fit very tight on certain Stan’s No Tubes hubs like the 3.30 and the Easton X4 hubs. With a little filing and some, grease they will go on. These are specifically designed pour use with SRAM cassettes. The clocking, or rotational orientation, between SRAM and Shimano cassettes are much different so optimal shifting cannot be achieved unless the design is optimized pour each separately.   Related ProductsGoatlink – improve the long term shifting when using a Shimano rear derailleur (HIGHLY recommended over the longer b-screw) 16t replacement cog – smooth out those cassette transitions Longer b-screw – necessary with some SRAM GC42 and Shimano GC40 applications.  Necessary on all Shimano GC42 applications if not using the Goatlink   Tech SpecsWeight: 79g Material:  7075-T6 aluminum Made in the  USA WARNING Handling this product will expose you to chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. pour further information go to​ Patent  and trademark information

Rupture de stock

UGS : 4104 Catégories : , ,